Injection-molding processability

Abbildung 6-1: Glass-fiber reinforced nylon pellets water absorption speed in air

Abbildung 6-2: CM3001-N water-absorption speed in air

Abbildung 6-3: Coloration change in glass fiber reinforced nylon 66 pellets as a result of hot-air blow-drying

Abbildung 6-4: Drying curve of glass-fiber reinforced nylon 66 pellets with water uptake

Abbildung 6-5: Properties of glass-fiber reinforced nylon 66 as a function of pellet water uptake

Abbildung 6-6: Change in melt viscosity as a function of shear velocity

Abbildung 6-7: Change in spiral flow length as a function of injection pressure

Abbildung 6-8: Change in spiral flow length as a function of product thickness

Abbildung 6-9: Change in mold shrinkage as a function of injection pressure

Abbildung 6-10: Change in mold shrinkage as a function of injection pressure

Abbildung 6-11: Dimensional change resulting from heat treatment

Abbildung 6-12: Dimensional change resulting from heat treatment

Abbildung 6-13: Dimensional change over time when left indoors (Part 1)

Abbildung 6-14: Dimensional change over time when left indoors (Part 2)

Abbildung 6-15: Relationship between water absorption and dimensional change (Part 1)

Abbildung 6-16: Relationship between water absorption and dimensional change (Part 2)

Abbildung 6-17: Time required to regulate moisture level

Abbildung 6-18: Time required to regulate moisture level

Abbildung 6-19: Time required to regulate moisture level